Monitor the environment you live and work in with the EasyLog EL-SIE-1. Configuration is simple, with no software to install
on your PC or Mac – just connect the logger with a USB cable, and use your standard web browser to configure the device for
logging. You don’t even need internet access to set up and use the EL-SIE-1, it really couldn’t be easier.

The logging interval can be set between 10 seconds and 24 hours, with immediate, delayed, triggered or push-to-start logging.
Alarms are fully user configurable, with functionality including cumulative alarms, pre-alarms, a delay before alarm triggering,
and an alarm hold option, which continues showing the alarm condition even if the reading returns to an acceptable level.

The display shows current, maximum and minimum readings, and three coloured LEDs indicate device status at a glance.
Once logging is complete, re-connect to your computer and use your browser to view, analyse and save your data. You can also
choose to upload your data to an Easy Log Cloud account, making the data accessible online for powerful graphing, analysis and
report generation.

Typical battery life is over 1 year using standard AAA alkaline batteries, and a wall mounting bracket is supplied with the device.

SPECIFICATIONS
Temperature Measurement range: -18 to +55°C (-0.4 to +131°F)
Resolution: 0.01°
Accuracy: ±0.2°C (±0.36°F) typical
Long term stability: <0.03°C (<0.054°F) / year
Measurement units: °C, °F or K
Logging rate: 10 seconds to 24 hours, user selectable
Start modes: Immediate, push to start, delayed start, parameter triggered
Memory capacity: Over 1,000,000 total readings
Power source: 2 x AAA 1.5V battery
Battery life: >1 year (at 25°C with 10 minute logging rate)
Dimensions: 93 x 42 x 17 mm (excluding bracket)
Operating temperature range: -18 to +55°C (-0.4 to +131°F)
Environmental rating: IP2X

Download Datasheet: EL-SIE 1